Answer: A dripping faucet usually indicates that the washer (for a compression faucet) or the o-ring/seals (for cartridge and ball faucets) inside the faucet has worn out or become damaged. These parts can deteriorate over time due to normal wear and tear or from sediment build-up, causing water to leak through.
Answer: Low water pressure can be caused by several issues, including clogged pipes, partially closed or malfunctioning shut-off valves, pipe corrosion, or problems with the municipal water supply. If only one fixture has low pressure, the problem is likely localized to that fixture or its supply line.
Answer: To unclog a drain, you can start with a plunger to try and dislodge the clog. If that doesn't work, you can use a drain snake to physically remove the blockage. Chemical drain cleaners are also an option, but they should be used sparingly as they can damage some pipe materials over time.
Answer: A running toilet is often due to a faulty flapper valve that allows water to flow from the tank into the bowl. It can also be caused by an improperly adjusted or broken fill valve, or a leak in the flush valve seal. Replacing or adjusting these components can usually fix the issue.
Answer: To prevent pipes from freezing, keep your house temperature at 68 degrees Fahrenheit or higher, even if you are not home. Insulate exposed pipes, especially those in unheated areas like basements, attics, and garages. During extremely cold weather, let faucets drip slightly to keep water moving within the pipes, and keep cabinet doors open under sinks to allow warm air to circulate around the pipes.
Answer: Whether to repair or replace a leaky faucet depends on the age of the faucet, the severity of the leak, and whether it's a recurring problem. Minor leaks can often be repaired by replacing worn-out parts like washers or o-rings. However, if the faucet is old, has multiple issues, or continues to leak after repairs, it might be more cost-effective to replace it with a new, more efficient model.